.st0{fill:#FFFFFF;}

General AMSOIL News, Tech Talk, Tuesday Tech Tips, Video Post

Brake Pedal Pulsation Demystified: Causes and Cures

 September 17, 2024

By  Greg Vaughn

Publisher's Note: Welcome to our 29th edition of Tech Tips Tuesday on "Brake Pedal Pulsation Demystified: Causes and Cures".  We'll be re-publishing an edition of AMSOIL Tech Tips for you every Tuesday.  Click on the Blog Category "Tuesday Tech Tips" to see everything published to-date.

Brake Pedal Pulsation Demystified: Causes and Cures

John Gardner: Have you ever brought your vehicle to a stop and you feel the brake pedal going up and down, or even the steering wheel shimmy? Well, what is it and how do we solve that problem?

Welcome to this AMSOIL Tech Tip. What you probably have is a brake pedal pulsation. Now, what causes it? You can actually see it here on the graphic. Matter of fact, I can demonstrate it right here. Our rotor, you could have what's called lateral run-out, which means the rotor's warped, and as it's warped, it's going around, and when it goes around, it's actually touching that pad every time in the same spot.

Now, that's really not causing the pedal pulsation, but what that causes is disc thickness variation (DTV). What does that mean? Well, that's in and out of the rotor where it's been eaten at in places. It doesn't have to be lateral run-out, doesn't have to be warped, but it goes in and out. So, when it goes in and out, those pads are squeezing, and you're feeling that come back into the actual pedal.

Now, how do we check for that? Well, it's real simple. You can get a dial indicator. We just secured the hub to the rotor. Once we did that, we put a dial indicator on it, spun it around. Manufacturers usually don't want more than about three-thousandths disc thickness variation. You can take a micrometer and go in eight places around that rotor. You don't want more than a half of a thousandth; that's going to cause pedal pulsation.

Now, once that happens, Len, I got to either cut the rotors or throw them out. That's costly. How can we avoid it?

Len Groom: Well, you want to start by making sure that there's no rust on anything. So, if you've got issues with your hub, get a good look at it. If you need to clean some rust off there, you go ahead and wire brush that right off there. Make sure you hit it with a little brake clean, clean anything off there. Make sure your surfaces are flat.

John Gardner: Yeah, and that's a new term out there called stack tolerances. We want to make sure that's on there and on there right. Another thing, no place for gunplay putting on wheels. Do not use an impact. Use your torque wrench or torque sticks to put it on.

Now Len, these rotors, they come out. Once we're done with that job, we want to make sure they're clean. This one actually came from the factory, and you can see this stuff. There's a coating on there. You guys got a product that takes care of that and so much more.

Len Groom: Yep, you want to make sure that you clean that off really well. You want some good pressure in the can, a real good solvent product that dries really quickly. So, you just go ahead and hit that. We got a little all over.

John Gardner: Yeah

Len Groom: And it'll clean that right off real nicely.

John Gardner: Did that in no time.

Become a Preferred Customer

Call us at  

920-733-2753

Whatever your comments, suggestions or questions about Brake Pedal Pulsation,
we welcome you to Contact Us!

The best ways to reach us are via our Contact Us page, or by calling us toll free at
920-733-2753 between 8 am and 9 pm CST Monday through Saturday.

You are welcome to 'Like" us on Facebook where we share news about our AMSOIL products and customers.

Please follow us on our LinkedIn Company Page for news as well.

If you're on Twitter, you'll find us at @vaughn_inc
You're welcome to follow our AMSOIL product news bites there as well.

Remember, the best way for you to reach us is via the contact us page on this website or by calling toll free 920-733-2753 between 8 am and 9 pm CST Monday through Saturday.

Whatever your interest we welcome your inquiry!

Greg Vaughn
Referral # 779
Vaughn Enterprises, Inc.
AMSOIL Direct Jobber
Greg@VaughnInc.com
www.VaughnInc.com
Office: 920-733-2753
Toll Free: 800-581-5823
Fax: 920-734-5823

Author: Greg Vaughn, President & CEO

Family Dealership established 1974
Vietnam War Veteran
Helicopter Mechanic, Military & Civilian
Civil Service, 1982- 2003

Author
Tags:

Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}